RESPONSBILITY & LIABILITY
1.Manufacturer is responsible for all outgoing product quality that in compliance with all applicable international safety requirements, industrial standard and requirement listed in the purchasing order.
URPOSE OF INSPECTION
1.The purpose of inspection is to verify the quality of product is whether meet customer’s requirements 
2.Verify aesthetic as per approved sign sample
3.Verify quantity and shipping mark as per customer's Purchase Order and Packing List
4.Verify product function as per approved sample and specification.
5. Verify critical safety and product requirement according to international safety requirements and customer requirement.
SAMPLING PLAN AND ACCEPTANCE LEVEL
Random sampling according to ANSI Z.1.4 (Military Standard 105E-S-1) for following product category and define the shipment inspection lot disposition

DEFECT CLASSIFICATION
Critical Defect
This is a safety defect which has the potentiality to cause significant injury or illness in person’s assembling, handing ,or using the product, and/or is not in compliance with regulatory requirements.
Major Defect
This is a defect which has functional problem and /or aesthetic conditions which may prevent the product from being sold. High probability of a consumer/dealer return, significant customer dissatisfaction, and no more purchase.
Minor Defect
This is a defect which the customer will notice, but most probably, will not be returned by the consumer, dealer or write a complaint letter. Defects in this class may negatively impact the consumer’s opinion on the quality of product.
General Inspection Checkpoints:
• Shipment lot quantity check
• Visual verification for material, colors, style, design etc. against product specification or reference sample
• Visual check on workmanship and functions
• Packing method and package inspection
• Marking and labeling check
• Data measurement
• On-site testing if applicable
Packing check:
•All cartons should be checked for carton markings, quality, quantity, and proper assortment according to the purchase order and any specific criteria provided.
Aesthetic inspection:
• Inspector will check for appearance and workmanship using the approval sample and any other available reference criteria ( product specification, PO comments, etc.)
• For purposes of visual inspection these non-conformance should be those which are obvious when the item is viewed from an “arm length”
• This inspection will also check for any missing major components
Function inspection:
• Verification of claims/performance feature statements on the product package
• Ease of usage/function/fitness for use
• General product safety considerations - including non-functional sharp points or edges, small parts, etc. when handling the item or simulating normal use
• Measurement for the dimensions, counts, and weights which claimed on PO or package
• For any product requiring assembly, must accord to manual to assemble product (AQL S-3 standard)
On-site test ( if required):
• Drop test
• Torque test
• Tension Test
• Adhesion test
• High voltage test
• Current check
• Power check
• Sound level test （dB）
• Metal Detection Test
• Impact Test
• Color Fastness Test
• Humidity measurement test
• Battery voltage check 
• bar code check
• Special requirements of customer
For regular products - cloth, wood, inspection standard for  ceramic criteria as inspection reference：